Cable Glands: Size, IP Rating and EMV Shielded Grounding
The Cable That Pulled Out (No Gland) We ran a sensor cable (article 166) into the panel. The cable went through a hole (no gland, just a plastic bushing). On the floor, the cable pulled…
EMV cable gland
Shielded Cable Grounding: One End, 360 Degrees and No Ground Loop
The Encoder Cable That Picked Up Noise We used an encoder cable (article 166) on a servo motor. The encoder signal (position feedback) was noisy — the servo (article 132) moved in small steps (jitter)….
