What is the standard formula for conveyor belt speed?

The standard industrial formula for conveyor belt speed (in m/min) is: (Product Length + Product Gap) × Throughput ÷ 1000. This formula converts millimeter measurements to meters, and links your product parameters directly to your target production volume.

How do I calculate conveyor speed from pieces per minute (PPM)?

To calculate conveyor speed from PPM (throughput), first add your product length and the gap between products (in mm), multiply that sum by your PPM, then divide by 1000 to convert to meters per minute. This gives you the exact belt speed needed to achieve your target production rate.

What is the typical conveyor speed for packaging lines?

Typical conveyor speeds for packaging lines range from 10 m/min to 60 m/min, depending on the product size, packaging process, and automation level. High-speed packaging lines can reach up to 120 m/min, while precision processes like pharmaceutical filling may use slower speeds below 10 m/min.

How does product spacing affect conveyor speed?

Larger product spacing requires a faster conveyor speed to maintain the same throughput, as each product takes up more total length on the belt. Conversely, smaller gaps allow for slower belt speeds while achieving the same production volume. Correct spacing is critical for automated equipment to have enough time to process each product.

Can this calculator be used for both flat and inclined conveyors?

Yes, this calculator works for flat, inclined, and declined conveyors for the core speed calculation based on throughput. For inclined conveyors, you will need to separately adjust for motor power and torque based on the incline angle and product weight, but the required belt speed for throughput remains the same.

Free Conveyor Speed Calculator | Accurate Belt Speed Calculation

输送机速度计算器

输送机示意图

产品长度 (mm)

产品间距 (mm)

通过量 (件/分钟)

计算公式

输送机速度 (米/分钟) = (产品长度 + 产品间距) × 通过量 ÷ 1000

计算结果

0 米/分钟

专业工业计算工具 | Professional Industrial Calculator