Work log — Indexer project, gear backlash control week Engineer: T. Nowak (precision mechanisms) Project: FBL-4 four-bar rotary indexer, cam and gear-blended drive Log period: Day 01 to Day 06 Document ref: WL-2026-0911-BK06 Day 01…
Work log — Machine tool project, rotary table calibration week Engineer: H. Gallo (machine tool metrology) Project: HMC-610 machining centre, 4th axis rotary table Log period: Day 01 to Day 06 Document ref: WL-2026-0911-RT05 Day…
Work log — Assembly cell project, vision-to-machine datum week Engineer: M. Offredi (automation integration) Project: ASC-12B smart assembly cell, camera-guided gear insert Log period: Day 01 to Day 07 Document ref: WL-2026-0911-VD04 Day 01 —…
Work log — Pallet stacker project, cylinder cushioning week Engineer: A. Benetti (pneumatics commissioning) Project: PSR-900 palletising suction stacker, 900 mm lift arm Log period: Day 01 to Day 06 Document ref: WL-2026-0911-CS03 Day 01…
Work log — Lift table project, worm gear drive diary Engineer: E. Kowalski (mechanical designer) Project: LFT-1400 service lift, 1,400 kg capacity, 1.1 m travel Log period: Day 01 to Day 08 Document ref: WL-2026-0911-WG02…
Work log — Labeller project, timing belt tension week Engineer: D. Marchetti (machine commissioning) Project: LBL-2300 hot-melt labeller, servo-fed label feed Log period: Day 01 to Day 05 Document ref: WL-2026-0911-TB01 Day 01 — morning…
PROJECT DESIGN REVIEW — MINUTES OF MEETING Project: six-station machining cell with one robot load station Review subject: automatic load and unload mechanism, gripper sizing, cycle timing, fault recovery Date: 18 August, 10:30 to 12:20,…
PROJECT DESIGN REVIEW — MINUTES OF MEETING Project: automation island with nine machines, one PLC cabinet Review subject: cable tray routing, separation, bend radius and future spare capacity Date: 4 August, 09:00 to 10:40, meeting…
PROJECT DESIGN REVIEW — MINUTES OF MEETING Project: heavy gantry machining centre, 6,400 kg total mass Review subject: center of gravity position, foot print, leveling feet and floor loading Date: 22 July, 10:00 to 11:50,…
PROJECT DESIGN REVIEW — MINUTES OF MEETING Project: CNC machining cell with a long-travel gantry, X-axis 3.2 m Review subject: guide rail lubrication regime and wiper / scraper selection Date: 7 July, 13:30 to 15:20,…
PROJECT DESIGN REVIEW — MINUTES OF MEETING Project: rotary turntable station for paint pre-treatment, 1.8 m platen Review subject: slewing bearing size, race type and mounting bolt pattern Date: 18 June, 09:30 to 11:00, meeting…
PROJECT DESIGN REVIEW — MINUTES OF MEETING Project: rotary indexing unit for a coating cell, C-axis Review subject: reducer family choice and backlash specification Date: 2 June, 14:00 to 15:40, meeting room 3 Document ref:…
PROJECT DESIGN REVIEW — MINUTES OF MEETING Project: pallet conveyor for an assembly cell, belt pick-up upgrade Review subject: timing belt drive selection, design power and safety factor Date: 19 May, 09:00 to 10:30, workshop…
PROJECT DESIGN REVIEW — MINUTES OF MEETING Project: gantry-style inspection machine, X-axis rail conversion Review subject: guide rail mounting datum, reference edge and bolting sequence Date: 6 May, 13:30 to 15:10, workshop office Document ref:…
PROJECT DESIGN REVIEW — MINUTES OF MEETING Project: three-axis pick-and-place cell, Z-axis rebuild Review subject: ball screw preload class for the vertical drive Date: 22 April, 10:00 to 11:40, meeting room 1 Document ref: DMR-2026-0422-ZAX01…
